
@SpecterDIY und Specter Shield: Buy the Hardware Wallet for Bitcoiner
Joined October 2020
- Tweets3.9K
- Following654
- Followers1.3K
- Likes4.9K
Pinned Tweet
Specter is since month sold out in my shop.
I will try to be the first shop selling ready to use Specter 2 after they are available.
If you are interested check my newsletter below, so you get notified when it is released:
ClavaStack retweeted
This was the first recorded Scan of the Specter 2 prototype Firmware, by @SandLabs_21 .
But still there is a lot of work to do until we can release it.
ClavaStack retweeted
So yes. Specter 1 had cable based singing (which is deactivated per default) and which is less secure than Air-Gapped Signing.
The Specter 2 prototype experimental firmware @SandLabs_21 did now also has it.
But for releasing that we still do need a lot of time for reviewing.
ClavaStack retweeted
People hearing that Specter Shield Metal is bad are badly available because of globally sold-out STM32 Smartphone Developer Boards.
Replying to @SpecterDIY @ClavaStack
That sucks. I love the metal casing and size. This setup seems like the best money can buy.
ClavaStack retweeted
Specter 2 with NFC + physical smartcard scanner?
@SandLabs_21 already has a working prototype that encrypts the seedphrase to the smartcard via both.
Still experimental -> it’ll take time before it’s easy to build at home.
ClavaStack retweeted
I think it is harder to fall for phishing if a hardware wallet and its companion app (software on PC or smartphone) are connected as little as possible.
Specter Hardware Wallets were sold out for months.
I was able to get the last few boards. So that's it from Generation 1 Specter until July 2027.
Here you can get them:
clavastack.com/products/spec…
ClavaStack retweeted
AirGapped via QR is not the same everywhere.
´There are at least 3 different standards.
With Specter we invented PMOFN (Specter) QR. Afterwards 2 other standards where invented. Where we support 2 of.
With Specter you can use the SD card only for updating, while QR codes are used only for signing.
This avoids using the same connection for everything.
ClavaStack retweeted
Sending Bitcoin air‑gapped via QR codes reduces your attack surface.
Since QR codes only allow limited data.
Also you actively see how much data is transferred by the number of QR codes you are scanning.
Uncommon amounts of QR codes can be detected.
ClavaStack retweeted
😭: "But even with Air-Gapped Hardware Wallets you cannot see what data is transferred, as you only see QR-Codes"
🧐: The QR Codes are compatible with a bunch of different Companion Apps that run on the same standard,
and a bunch of different Hardware Wallets that run on the same standard.
You just can crossverify!
ClavaStack retweeted
Air Gapped is more transparent!
The Hardware Wallet shows:
• When it communicates
• What is communicated
• How much data is communicated
• Only when intended
Some ultra‑paranoid people feel that not plugging your Hardware Wallet into a device assumed to be malicious could be more secure.
First ever Specter 2 Workshop at Bitcoin Amsterdam Conference with around 5 attendees
At this point this are only prototypea with an experimental alpha version that got build
Here physically destroying WiFi Module
When @giacomozucco tried out the @SpecterDIY at the @cypher_tank pitch contest, he had such a happy face.
I was the last one a the @cypher_tank pitch Contest in a special format afterwards
I showed the judges @SpecterDIY and @ClavaStack






















